Sales 1-855-293-SALE (7253) or Chat
FrontLine™ Wireless Driveway Alert System
with Adjustable Sensitivity
FRONTLINE™ WIRELESS DRIVEWAY ALERT SYSTEM
The first point of protection in your home security set up is the FrontLine Wireless Driveway Alert System. Always be aware when guests or trespassers pull into your driveway or enter a restricted area. Defender is a leader in home and business security solutions, and now brings you this compact motion alert system for the peace of mind knowing that your property is safe.
Defender Makes Setup Easy1. Pair - Power on both units and press the pair button on receiver. The receiver will beep once and the first zone LED will blink. Choose the sensor you would like to monitor zone 1, and press the pair button inside the battery compartment. The receiver will beep twice and the chosen zone LED will stop flashing when the units have been paired.
2. Mount - You will need an object such as a wood post or a tree to screw the hanging clip to. Once you have the hanging clip secured to the post, hang the sensor unit on the hanging clip and fasten the sensor to the bottom of the hanging clip. The sensor should be installed approximately 4 feet off the ground, pointing on an angle so that it will sense the vehicle from behind as it passes.
3. Monitor - Enjoy your new Wireless Driveway Alert System! Always be aware when invited guests or unwanted trespassers visit your property or enter a restricted area.
CONNECT TO YOUR SECURITY SYSTEM
Connect the handheld alarm unit to any security system that has a two wire alarm input so that the alarm will go off when motion is detected by your cameras.
Adjustable SensitivitySelect your sensitivity level based on where your motion detector is located. Choose to be alerted only by approaching automobiles or increase the sensitivity to include approaching pedestrians. Detect up to 15ft away with a low energy draw or boost the power and detect up to 30ft away.
Go Completely Wireless with batteriesThis wireless driveway alert was designed to conserve battery life - in some cases, you won't have to replace batteries for over 6 months. When the sensor battery is low, the handheld receiver will alert you so you will always be protected. The receiver can be powered with the included AC power adapter.
30ft Detection zone notificationThe adjustable sensor can detect movement close up and even as far away as 30ft. With no wires involved, setup is simple and you can rest assured that the signal between your monitor and motion detector will remain strong for up to 300ft away.
Extra motion sensors are not included and can be purchased separately.
Optimum range is 150ft when signal is passing through walls or floors. Microwave ovens (when in use) may cause signal disruption at close range. Buildings with metal frames may also cause signal disruption. Maximum transmission range is 300ft. Motion sensor has multiple detection settings that affect the maximum distance and sensitivity of the unit.
Defender highly recommends the use of an Uninterruptible Power Supply (UPS) with surge protection for all products.
Although the motion sensor is weather resistant, please note that it is not weather proof – Do not install in areas that receive a lot of direct rain and/or snow.
Battery life of motion sensor is 6-12 months based on tests of daily moderate use (10 times/day). Battery life may vary depending on usage.
Product may not be exactly as shown on the package. Some images are used for illustration purposes only.
Defender does not endorse any Defender products for illegal activities. Defender is not responsible or liable in any way for any damage, vandalism, theft or any other action that may occur while a Defender product is in use by the purchaser.